Fendt 5270 C – 6300 C






In 2004, Fendt's smaller combines were replaced by models corresponding to Laverdas' M-series. Instead of Laverdas' Caterpillar engines, Fendts were equipped with SisuDiesels, with power outputs of 270 and 300 horsepower DIN. The shapes were round like Laverdas’, but the cab appeared significantly more restrained, as the plastic covers were gray instead of Laverdas’ and equivalent Massey Ferguson’s red panels.
Behind the threshing drum was a straw walker drum, and in front of the grain elevator there was an additional feed drum. The grain tank capacity was 90 hectoliters (82 hl in the tilting version). Standard equipment included, among other things, air conditioning, an air-suspended seat, a tilt cab, and threshing drum monitoring. The monitoring system tracked as many as 28 points. Unlike Laverdas, an 8-degree longitudinal tilt and a 20-degree lateral tilt were optional extras. Four-wheel drive was also available as an optional feature.
This is an automated translation. Please report any issues in the translation.
| Model | Fendt 5270 C | Fendt 6300 C | Fendt 5270 C | Fendt 6300 C |
|---|---|---|---|---|
| Imported to Finland | No | No | No | No |
| Years | 2004-07 | 2004-07 | 2007-11 | 2007-11 |
| Engine | SisuDiesel | SisuDiesel | SisuDiesel | SisuDiesel |
| Engine type | 74 ETA | 84 ETA | 74 ETA | 84 ETA |
| Displacement | 7400 cm³ | 8400 cm³ | 7400 cm³ | 8400 cm³ |
| Cyl/turbo | 6T | 6T | 6T | 6T |
| Power | 270 hp DIN | 300 hp DIN | 275 ISO hp DIN | 305(330) ISO hp DIN |
| Fuel tank | 450 l | 450 l | 600 l | 600 l |
| Transmission | hydr. | hydr. | hydr. | hydr. |
| Gears | 4 | 4 | 4 | 4 |
| Cutting width | 540 cm | 600 cm | 540 cm | 600 cm |
| Cutting width, alternative | 480-660 cm | 480-660 cm | 480-760 cm | 480-760 cm |
| Threshing cyl. diameter | 60 cm | 60 cm | 60 cm | 60 cm |
| 2. cyl. diameter | 60 cm | 60 cm | 60 cm | 60 cm |
| Threshing cyl. width | 134 cm | 160 cm | 134 cm | 160 cm |
| Number of straw walkers | 5 | 6 | 5 | 6 |
| Area of walkers | 573 dm² | 681 dm² | 573 dm² | 681 dm² |
| Lenght of walkers | 426 cm | 426 cm | 426 cm | 426 cm |
| Total screening area | 467 | 558 | 467 | 558 |
| Overall lenght | 891+pöytä cm | 891+pöytä cm | 891+pöytä cm | 891+pöytä cm |
| Width without header | 333 cm | 385 cm | 363 cm | 388 cm |
| Height with cabin | 400 cm | 400 cm | 400 cm | 400 cm |
| Weight without header | 12100 kg | 12600 kg | 12100 kg | 12600 kg |
| Grain tank | 90 hl | 90 hl | 90 hl | 90 hl |
| Unl. height | 445 cm | 445 cm | 445 cm | 445 cm |
| Tyres front (Finland) | 650/75R32 | 800/65R32 | 800/65R32 | 800/65R32 |
| Tyres front, alternative | 800/65R32 | 650/75R32 | 650/75R32 | 650/75R32 |
| Tyres rear (Finland) | 460/70R24 | 460/70R24 | 460/70R24 | 460/70R24 |
| Reel forward/backw. adjustment | hydr. | hydr. | hydr. | hydr. |
| Reel speed adjustment | hydr. | hydr. | hydr. | hydr. |
| Threshing cyl. speed adjustment | hydr. | hydr. | hydr. | hydr. |
| Bottom sieve | adj. | adj. | adj. | adj. |
| Brakes | wet disc | wet disc | wet disc | wet disc |
| Reverser | x | x | x | x |
| Air conditioning | x | x | x | x |
| Heating | x | x | x | x |
| Grain loss indicator | x | x | x | x |
| Floating cutting platform | x | x | x | x |
| Autom. control of cutting height | x | x | x | x |
| Slope levelling | opt. | opt. | opt. | opt. |
| Cutting platform lateral tilt | x | x | x | x |
| Type of cutting platform floating | autom. | autom. | autom. | autom. |
| Alternative hp | - | - | - | 305(335) ISO hp |
- More from this manufacturer






