Konedata - Search
Siirry sivupalkkiinSiirry alaosaanHürlimann H-6130 – H-6160




In 1979, Hürlimann celebrated its 50th anniversary, and the event was marked by renewing the entire model range and changing the products' color from red to light green. The engines were also an entirely new series. Development of the model range had begun before the Swiss factory was acquired by Same in 1977, so there were still few technical similarities. However, the front axles of the four-wheel-drive models were made by Same.
The H-6130 and H-6160 were equipped with a 6.8-liter engine, which was later also used in Lamborghini and Same’s largest models. The H-6160’s engine was turbocharged. Instead of the four basic gears found in smaller models, the transmission had only three basic gears, with a total of 12+4 gears.
The lifting capacity of the H-6130 was the same 4 tons as in the mid-range models. The output of the standard hydraulics was not specified, but a more powerful 65-liter pump was available as an option. Considering these figures, it is surprising that the tractor’s weight is one ton heavier than the 115-horsepower model. The H-6160 came standard with a more powerful pump and a 6-ton lifting capacity.
The series also included the H-6200 with a 7.5-liter engine (200 hp), but only two units were produced. It had a 36+12 transmission and a lifting capacity of 7,500 kg. Sales of Hürlimann tractors outside their home country were hindered by higher prices compared to competing brands. These models were indeed the last tractors manufactured in Switzerland.
This is an automated translation. Please report any issues in the translation.
| Model | Hürlimann H-6130 | Hürlimann H-6160 | Hürlimann H-6200 |
|---|---|---|---|
| Manufacturer name | Hürlimann | Hürlimann | Hürlimann |
| Imported to Finland | No | No | No |
| Years | 1979-84 | 1979-84 | 1980 |
| Engine model | H1106/12 | H1106/15T | H1156 |
| Cyl/Turbo/Intercooler | 6 | 6T | 6T |
| Displacement | 6840 cm³ | 6840 cm³ | 7480 cm³ |
| Bore x stroke | 110×120 mm | 110×120 mm | 115×120 mm |
| Rated power | 130/2200 hp DIN/rpm | 160/2200 hp DIN/rpm | 200/2200 hp DIN/rpm |
| Torque | - | - | - |
| Gears | 12+4 | 12+4 | 36+12 |
| Synchronized gears | 12+4 | 12+4 | 36+12 |
| Speeds in km/h | 1,9-24,4 | 2,5-30,0 | 1,8-31,9 |
| Max. speed | 25 km/h | 25/30 km/h | - |
| Hydr. flow l/min | 40 l/min | 65 l/min | 65 l/min |
| Lift controls | mech. | mech. | mech. |
| Lift capacity | 4000 kg | 6000 kg | 6000 kg |
| PTO speeds | 540/1000 | 540/1000 | 540/1000 |
| Brakes | wet disc | wet disc | wet disc |
| Steering | hydrost. | hydrost. | hydrost. |
| Front tyres 4WD | 16.9-24 | 16.9-30 | 18.4-30 |
| Rear tyres 4WD | 18.4-38 | 20.8-38 | 20.8-42 |
| Weight 4WD | 5740 kg | 6500 kg | 8500 kg |
| Height with cab | 300 cm | 295 cm | 307 cm |
| Length (2WD/4WD) | 464 cm | 474 cm | 497 cm |
| Wheelbase (2WD/4WD) | 286 cm | 286 cm | 306 cm |
| Fuel tank | 230 l | 230 l | 230 l |
| Cab noise level | 86 dB | 84 dB | - |
| Solid cab | x | x | x |
| Diff. lock | opt. | opt. | autom. |
| Creeper gear | opt. | opt. | - |
| Powershift gears | - | - | mech. |
- More from this manufacturer






