John Deere W540 – W660




The W-series combines equipped with a single threshing drum were updated for the year 2016. The most significant change was a larger sieving area. There were two models with 5 rasp bars and two models with 6 rasp bars available. Engine power was slightly increased, and additional power was used when emptying the grain tank. In addition to urea injection and exhaust gas recirculation, the engines featured a particulate filter and an oxidation catalyst. These hot components were placed in a separate sealed and pressurized compartment. John Deere also now offered a 40 km/h road speed.
The options for cutter heads had been increased, following the trend of other manufacturers. In total, there were now six versions of grain platforms, and ±4 degrees of cutter bar tilt was standard. Behind the threshing drum was a straw walker and a separator with rasp bars. A sieving system tilting 7 degrees was now standard. The fan was renewed, and its adjustment range was increased. The rear axle was new and had a greater steering angle. The cab came standard with automatic air conditioning and a noise level of 72 dB.
Save
This is an automated translation. Please report any issues in the translation.
| Model | John Deere W540 | John Deere W550 | John Deere W650 | John Deere W660 |
|---|---|---|---|---|
| Imported to Finland | Yes | Yes | Yes | Yes |
| Years | 2016- | 2016- | 2016- | 2016- |
| Engine | JD | JD | JD | JD |
| Engine type | PSV6 6068 | PSS6 6068 | PSS6 6090 | PSS6 6090 |
| Displacement | 6788 cm³ | 6788 cm³ | 8984 cm³ | 8984 cm³ |
| Cyl/turbo | 6 TI | 6 TI | 6 TI | 6 TI |
| Power | - | - | - | - |
| Fuel tank | 800+AB33 l | 800+AB33 l | 800+AB33 l | 800+AB33 l |
| Transmission | hydr. | hydr. | hydr. | hydr. |
| Gears | 3 | 3 | 3 | 3 |
| Speed min-max. | 0-20/30 km/h | 0-20/30 km/h | 0-20/30 km/h | 0-20/30/40 km/h |
| Cutting width | 550 cm | 550 cm | 610 cm | 610 cm |
| Cutting width, alternative | 480-660 cm | 480-660 cm | 480-915 cm | 480-1070 cm |
| Reel diameter | 110 cm | 110 cm | 110 cm | 110 cm |
| Header length | 40-57 cm | 40-57 cm | 40-57 cm | 40-57 cm |
| Threshing cyl. diameter | 66 cm | 66 cm | 66 cm | 66 cm |
| 2. cyl. diameter | 40 cm | 40 cm | 40 cm | 40 cm |
| Threshing cyl. width | 140 cm | 140 cm | 167 cm | 167 cm |
| Number of straw walkers | 5 | 5 | 6 | 6 |
| Area of walkers | 670 dm² | 670 dm² | 800 dm² | 800 dm² |
| Lenght of walkers | 480 cm | 480 cm | 480 cm | 480 cm |
| Straw shieve | 250 dm² | 250 dm² | 310 dm² | 310 dm² |
| Bottom shieve | 220 dm² | 220 dm² | 260 dm² | 260 dm² |
| Total screening area | 520 | 520 | 630 | 630 |
| Overall lenght | 950+pöytä cm | 950+pöytä cm | 950+pöytä cm | 950+pöytä cm |
| Overall width | 589 cm | 589 cm | 656 cm | 656 cm |
| Width without header | 349 cm | 349 cm | 399 cm | 399 cm |
| Height with cabin | 385 cm | 385 cm | 388 cm | 388 cm |
| Weight with cabin | 16220 kg | 16220 kg | 17430 kg | 17430 kg |
| Grain tank | 80 (100) hl | 80 (100) hl | 90 (110) hl | 90 (110) hl |
| Unl. height | 404 cm | 404 cm | 420 cm | 420 cm |
| Tyres front (Finland) | 800/65R32 | 800/65R32 | 900/60R32 | 900/60R32 |
| Tyres front, alternative | 1050/50R32 | 1050/50R32 | 1050/50R32 | 1050/50R32 |
| Tyres rear (Finland) | 480/60R26 | 480/60R26 | 600/65R28 | 600/65R28 |
| Tyres rear, alternative | 600/65R28 | 600/65R28 | - | - |
| Reel forward/backw. adjustment | hydr. | hydr. | hydr. | hydr. |
| Reel speed adjustment | elec. | elec. | elec. | elec. |
| Threshing cyl. speed adjustment | hydr. | hydr. | hydr. | hydr. |
| Bottom sieve | adj. | adj. | adj. | adj. |
| Brakes | wet disc | wet disc | wet disc | wet disc |
| Reverser | x | x | x | x |
| Air conditioning | x | x | x | x |
| Heating | x | x | x | x |
| Grain loss indicator | x | x | x | x |
| Floating cutting platform | x | x | x | x |
| Autom. control of cutting height | x | x | x | x |
| Slope levelling | x | x | x | x |
| Cutting platform lateral tilt | x | x | x | x |
| Type of cutting platform floating | autom. | autom. | autom. | autom. |
- More from this manufacturer






