Konedata - Search
Siirry sivupalkkiinSiirry alaosaanNew Holland CR7.90 – CR10.90




In honor of the 40-year history of NH’s combine harvesters, the CR series harvesters received new model designations and a new Harvest Suite Ultra cab for the 2016 season, with a reported noise level of 73 dB. The new high-powered CR10.90 model had already performed world-record-worthy work the previous year by harvesting 800 tons of wheat in 8 hours. Its threshing mechanism remained the same size as before, but the rotors featured more efficient rasp bars. At this stage, only the CR10.90’s new 16-liter engine complied with Tier 4B emissions standards.
In addition to the standard header, cutting table options included the 575 mm length-adjustable Varifeed and the ground-contour-adapting Superflex. The two largest models came standard with a cab-folding unloading auger. These models also featured an even larger 14.5-hectoliter grain tank. Hillside separation sieves and a stone protection system installed tangentially between the two rotors were now standard. The IntelliView IV display had grown to 26.4 cm in size. The CR10.90 weighed nearly 25 tons equipped with track chassis.
In 2018, the CR Revelation lineup was updated due to emissions regulations. Most models offered increased power compared to before. The AdBlue tank was enlarged to 160 liters. The Dynamic Feed Roll Reverser aimed to prevent rotor blockages by repeatedly changing the rotor’s direction. The Intelli Cruise II system’s three driving strategies focused on ensuring smooth grain flow and thereby increasing threshing capacity. Meanwhile, the IntelliSense automation selected the best settings every 20 seconds using load sensors and cameras, maximizing the amount of grain passing through the combine while minimizing losses. In the two largest models, the grain tank unloading speed was increased up to an impressive 142 liters per second.
The Stage V models for the 2020 season once again saw slight increases in power ratings.
For the 2024 season, new side decals were introduced. Operator comfort in the cab was improved, among other things, with new seats.
This is an automated translation. Please report any issues in the translation.
| Model | New Holland CR7.80 | New Holland CR7.90 | New Holland CR8.80 | New Holland CR8.90 | New Holland CR9.80 | New Holland CR9.90 | New Holland CR10.90 |
|---|---|---|---|---|---|---|---|
| Imported to Finland | Yes | Yes | No | Yes | No | No | No |
| Years | 2019- | 2016- | 2016- | 2016- | 2016- | 2016-23 | 2016- |
| Engine | FPT | FPT | FPT | FPT | FPT | FPT | FPT |
| Engine type | Cursor 9 | Cursor 9 | Cursor 10 | Cursor 10 | Cursor 13 | Cursor 13 | Cursor 16 |
| Displacement | 8709 cm³ | 8709 cm³ | 10308 cm³ | 10308 cm³ | 12880 cm³ | 12880 cm³ | 15927 cm³ |
| Cyl/turbo | 6 TI | 6 TI | 6 TI | 6 TI | 6 TI | 6 TI | 6 TA |
| Power | - | - | - | - | - | - | - |
| Fuel tank | 750+AB120 l | 750/1000+AB120 l | 1000+AB120 l | 1000+AB120 l | 1000+AB120 l | 1300+AB120 l | 1300+AB120 l |
| Transmission | hydr. | hydr. | hydr. | hydr. | hydr. | hydr. | hydr. |
| Gears | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Speed min-max. | 0-30/40 km/h | 0-30/40 km/h | 0-30/40 km/h | 0-30/40 km/h | 0-30/40 km/h | 0-30/40 km/h | 0-30/40 km/h |
| Cutting width | 710/732 cm | 710/732 cm | 915 cm | 915 cm | 915 cm | 915 cm | 915 cm |
| Cutting width, alternative | 610-915 cm | 610-1067 cm | 763-1067 cm | 763-1250 cm | 915-1250 cm | 915-1370 cm | 915-1370 cm |
| Reel diameter | 107 cm | 107 cm | 107 cm | 107 cm | 107 cm | 107 cm | 107 cm |
| Header length | 55 cm | 55 cm | 55 cm | 55 cm | 55 cm | 55 cm | 55 cm |
| Threshing cyl. diameter | 43 cm | 43 cm | 43 cm | 56 cm | 56 cm | 56 cm | 56 cm |
| Threshing cyl. width | pituus 264 cm | pituus 264 cm | pituus 264 cm | pituus 264 cm | pituus 264 cm | pituus 264 cm | pituus 264 cm |
| Number of straw walkers | 2 drums | 2 drums | 2 drums | 2 drums | 2 drums | 2 drums | 2 drums |
| Straw shieve | 310 dm² | 310 dm² | 310 dm² | 395 dm² | 395 dm² | 395 dm² | 395 dm² |
| Bottom shieve | 191 dm² | 191 dm² | 191 dm² | 228 dm² | 228 dm² | 228 dm² | 228 dm² |
| Total screening area | 540 | 540 | 540 | 650 | 650 | 650 | 650 |
| Overall lenght | 997+pöytä cm | 997+pöytä cm | 997+pöytä cm | 997+pöytä cm | 997+pöytä cm | 904+pöytä cm | 904+pöytä cm |
| Overall width | 777 cm | 777 cm | 961 cm | 961 cm | 961 cm | 961 cm | 961 cm |
| Width without header | 363 cm | 363 cm | 363 cm | 387 cm | 387 cm | 387 cm | 387 cm |
| Height with cabin | 398 cm | 398 cm | 398 cm | 398 cm | 398 cm | 399 cm | 399 cm |
| Weight without header | 17769 kg | 17769 kg | 18869 kg | 19180 kg | 19623 kg | 20067 kg | 24667 (telak.) kg |
| Grain tank | 95/105 hl | 95/105 (115) hl | 115/125 hl | 115/125 (145) hl | 125 hl | 145 hl | 145 hl |
| Unl. height | 442 cm | 442 cm | 442 cm | 442/462 cm | 442/462 cm | - | - |
| Tyres front (Finland) | 900/60R32 | 900/60R32 | 900/60R32 | 900/60R32 | 900/60R32 | 900/60R32 | 900/60R32 |
| Tyres front, alternative | 1050/50R32 | 1050/50R32 | 1050/50R32 | 1050/50R32 | 1050/50R32 | 1050/50R32 | 1050/50R32 |
| Tyres rear (Finland) | 540/65R30 | 540/65R30 | 600/65R28 | 600/65R28 | 600/65R28 | 600/65R28 | 600/65R28 |
| Tyres rear, alternative | 620/70R30 | 620/70R30 | 620/70R30 | 620/70R30 | 620/70R30 | 620/70R30 | 620/70R30 |
| Reel forward/backw. adjustment | hydr. | hydr. | hydr. | hydr. | hydr. | hydr. | hydr. |
| Reel speed adjustment | elec. | elec. | elec. | elec. | elec. | elec. | elec. |
| Threshing cyl. speed adjustment | elec. | elec. | elec. | elec. | elec. | elec. | elec. |
| Bottom sieve | adj. | adj. | adj. | adj. | adj. | adj. | adj. |
| Brakes | wet disc | wet disc | wet disc | wet disc | wet disc | wet disc | wet disc |
| Reverser | x | x | x | x | x | x | x |
| Air conditioning | x | x | x | x | x | x | x |
| Heating | x | x | x | x | x | x | x |
| Grain loss indicator | x | x | x | x | x | x | x |
| Floating cutting platform | x | x | x | x | x | x | x |
| Autom. control of cutting height | x | x | x | x | x | x | x |
| Slope levelling | x | x | x | x | x | x | x |
| Cutting platform lateral tilt | x | x | x | x | x | x | x |
| Type of cutting platform floating | autom. | autom. | autom. | autom. | autom. | autom. | autom. |
| Alternative hp | - | - | - | - | 544(600) hp | 544(600) hp | - |
- More from this manufacturer






