Laverda

The first Italian combine harvester was the Laverda M 60, introduced in 1956. Laverda had already gained a reputation in export markets with, among other things, its mowers and binders, and the export market for its combine harvesters also got off to a good start. The model number M 60 referred to the width of the threshing drum. The engine was a 1.9-liter Fiat diesel. The structure of the combine had similarities to Massey-Harris machines: for example, the engine was located between the front wheels, and the discharge pipe of the optional grain tank was similar. In the brochure, the combine was depicted with dual wheels.

In the following years, the M 60 was followed by the larger M 90 and the intermediate model M 75. The M 90 had a 61-horsepower OM diesel engine, and the later M 90 B had 66 hp.

This is an automated translation. Please report any issues in the translation.

Combines

Laverda M 60 – M 90

In 2012, the Laverdas 200 REV lineup was replaced by the new M200 combine, which mainly corresponded to the smallest model of the previous lineup. The engine was changed from Iveco to the group's own Agco Power, which was equipped with urea injection. Behind the threshing cylinder was the REV drum that gave the previous lineup its name, promised to increase threshing capacity by 20%. The cab was lightly updated as the Elegance Cab. More adjustments were consolidated into a driving computer called Agritronic Plus II. Later, a lower-powered M180 was also introduced.

This is an automated translation. Please report any issues in the translation.

Laverda M180 – M200

In the renewed Laverda range of 2011, models were reduced and, in some respects, combines were also made cheaper. In the 300 series, there were only two base models left, with the higher power one having only 276 hp. Larger models were introduced as the M 400 series. The MCS after-threshing rotor was removed from the standard equipment and replaced with a REV stirring drum. The grain tank had a capacity of 86 hectoliters in both the 5- and 6-row versions. The GSAX header tilt system and the more versatile Agritronic Plus II onboard computer and control system were standard. The cab was almost unchanged, but the most glaringly overdesigned details of the previous version were made more conventional. The combine's machinery is positioned quite high: the first threshing rotor is partly located behind the cab, and the after-threshing rotor is at seat level.

This is an automated translation. Please report any issues in the translation.

Laverda M 300 – M 310

After Laverdan was fully acquired by Agco, all models used Finnish Agco Power engines, and the Power Flow cutting platform originally developed by Dronningborg was now also available for Laverdan’s largest models. The new M 400 Advanced series was formed from the most powerful models of the former M 300 series. However, this series also included both 5- and 6-rotor options, meaning Laverdan’s model ranges overlapped quite a bit. The M 400 series featured LC parallel models for hillside harvesting as well as the more demanding conditions with a 30-degree tilting Integrale mechanism.

The slightly updated cab controls were named Commodore Cab II, and the operating system was Agco’s GTA II with a 10.5-inch color display.

Just a year later, the series underwent minor updates. The cab was now completely redesigned and named SkylineCab. The operating system had a sharper display, TechTouch, which was essentially Fendt’s Varioterminal. Despite the development, the word Advanced was dropped from the series name. The M 400 series thoroughly represents what is important about Laverdan combines: the appearance is modern, the number of cab options in the series is enormous compared to production volume and they change frequently, the functions and adjustments are extensively electrified even in the cheapest models, and there are hillside harvesting versions available for every need.

Save

This is an automated translation. Please report any issues in the translation.

Laverda M 400 – M 410

The 6-cylinder models 3850 and 3890 largely corresponded to the 5-cylinder models. Compared to the earlier 3900, these models were in some respects smaller. The 3850 had a mechanical 4-speed transmission, and air conditioning was an optional extra. The hydrostatic 3890 also had a more powerful 200 hp engine. A new cab was introduced for these models in 1988 as well. The grain loss monitoring system and area measurement were standard features.

This is an automated translation. Please report any issues in the translation.

Fiatagri 3850-3890

The hillside combine harvester Laverda AL, equipped with a structure that tilts longitudinally and laterally, was renewed for the year 2009. Both models were now 5-rotor and were based on the earlier 255 AL. However, the MCS after-threshing device and four-wheel drive were removed from the AL rev model, and in this version, the grain tank was also smaller. In the AL quattro model, on the other hand, the grain tank was increased to 6.5 hectares and the engine was a 7.4-liter Sisu Diesel instead of Iveco. The AL quattro model also featured a more equipped Profi Cab cab, which included, among other things, an air-suspended seat. The Elegance cab of the AL rev also had an onboard computer Agritronic Plus, similar to those in larger Laverda models. The threshing mechanism of the AL models remained horizontal at 30 degrees longitudinal tilt and 40 degrees lateral tilt.

The 2012 lineup included two four-wheel-drive models equipped with Finnish engines. The more powerful Evo model featured a new Powerflow header and a redesigned Comfort cab, where the controls had been reorganized. The onboard computer in both models had progressed to a new generation.

This is an automated translation. Please report any issues in the translation.

Laverda AL rev – AL quattro

Between the Laverda REV and M series, the LCS models were introduced for the year 2007, whose main difference from the REV models was the MCS Plus threshing drum. Additionally, the GSAX system, which electronically maintained the cutting table height stable, was standard. The cab was the Profi Cab, similar to the larger models. The smaller model had a 245-horsepower Iveco engine, and the larger one had a 275-horsepower Sisu engine. In the LCS LS models, the machinery remained stable at a 20-degree side tilt and +/-8 degrees longitudinal tilt.

In MF's lineup, the equivalent of the LCS was the Activa S, and in Fendt's lineup, the L series.

This is an automated translation. Please report any issues in the translation.

Laverda 255 LCS – 296 LCS

More from this manufacturer

Laverda M180

malli

hinta (sis. alv)

Imported to Finland

Years

Engine

Engine type

moottorin merkki ja malli

turbo

teho

iskutilavuus

sylinterien lukumäärä

moottorin sijainti

polttoainesäiliön tilavuus

ajovoimansiirron tyyppi

nopeusalueiden lukumäärä

neliveto

työleveys

leikkuuleveys

leikkuupöydän korkeuden säätö

syöttöruuvin harjan etäisyys terän sormien kärjestä

terän korkeus, minimi

terän korkeus, maksimi

leikkuupöydän korkeuden osoitin

säätö korkeussuunnassa

säätö pituussuunnassa

nopeuden säätö

puintikelojen lukumäärä

varstojen lukumäärä

kelojen leveys

kelojen nopeus, maksimi

kelojen nopeuden säätötapa

varstasiltojen lukumäärä

siltojen pituudet (varstojen ulkoreunasta mitaten)

puintivälin säätö

puintivälin toteaminen ja mittaus

kohlimien lukumäärä

kohlimien leveys

kohlimien pituus

kohlimien pinta-ala

ruumenpinta-ala

siemenpinta-ala

eturaideväli

akseliväli

pituus kuljetusasennossa ilman pöytää

korkeus (ylimp. kiint. pisteeseen)

leveys, työasennossa

leveys, kuljetusasennossa

maavara koneen alla (minimi)

viljasäiliön tilavuus

viljasäiliön tilavuus lisälaidoin

paino työkunnossa (polttoainesäiliöt täynnä)

jarrut

laonnostimien lukumäärä

ruumenseulan tyyppi

työvalojen lukumäärä

työvalojen tyyppi

teho, kw/suurimman tehon kierrosluku, r/min

suurimman tehon kierrosluku

iskutilavuus, cm3/sylinterien lukumäärä, kpl

nopeus, km/h

työleveys (jakol. kärjestä mitattuna), cm/leikkuuleveys, cm

terän alin...ylin taso (korkeus maasta), cm

laonnostokelan säätöalue, r/min

puintikela 1 halkaisija

puintikela 2 halkaisija

puintikela 3 halkaisija

puintikelojen halkaisijat, cm

puintikelojen nopeuden säätö

varstojen 1 tehollinen pinta-ala (kaareva pituus x kelan leveys)

varstojen 2 tehollinen pinta-ala (kaareva pituus x kelan leveys)

varstojen 3 tehollinen pinta-ala (kaareva pituus x kelan leveys)

varstojen teholliset pinta-alat (kaareva pit. x kelan lev.), dm2

kohlintilan leveys x kohlinten pituus, cm

renkaat edessä

renkaat takana

Displacement

esipuhdistaja

Cyl/turbo

läpimitta (piikk.kärk.)

Power

Alternative hp

Fuel tank

Transmission

Gears

Speed min-max.

Cutting width

Cutting width, alternative

myynti

takaraideväli, cm

Reel diameter

Header length

Threshing cyl. diameter

2. cyl. diameter

Threshing cyl. width

Number of straw walkers

Area of walkers

Lenght of walkers

Straw shieve

päästöluokka

Laverda M200

Etusivu

Ajoneuvot ja ympäristö

Huolto ja tekniikka

Lukijan idea

Maarakennus

Maatalous

Osastot

Metsä

Pääkirjoitus

Uutiset

Weteraani

Yritykset ja tapahtumat

Koneviesti

Lehdet

Konedata

Palvelut

Tilaa Koneviesti

Asiakaspalvelu

Jätä ilmoitus

Tilaa uutiskirje

Lähetä uutisvinkki

Lähetä palautetta

Lähetä oikaisupyyntö

Toimituksen yhteystiedot

Mediamyynnin yhteystiedot

Ota yhteyttä

Send feedback

Welcome to the beta version of Koneviesti's new Konedata service! The service offers technical data for over 8000 tractors and combines. We are actively developing the service, so we appreciate your feedback.

Give feedback

Model	Laverda M180	Laverda M200	Laverda M200
Imported to Finland	No	No	No
Years	2015-	2011-15	2015-
Engine	Agco Power	Agco Power	Agco Power
Engine type	49 AWF.1194	66 AWI.787	74 AWF.1043
Displacement	4912 cm³	6600 cm³	7368 cm³
Cyl/turbo	4TI	6TI	6TI
Power	-	-	-
Fuel tank	450+AB80 l	450+AB80 l	450+AB80 l
Transmission	hydr.	hydr.	hydr.
Gears	3	3	3
Cutting width	540 cm	540 cm	540 cm
Cutting width, alternative	420-600 cm	420-600 cm	480-760 cm
Threshing cyl. diameter	60 cm	60 cm	60 cm
Threshing cyl. width	134 cm	134 cm	134 cm
Number of straw walkers	5	5	5
Area of walkers	500 dm²	500 dm²	500 dm²
Lenght of walkers	426 cm	426 cm	426 cm
Straw shieve	263 dm²	263 dm²	263 dm²
Bottom shieve	204 dm²	204 dm²	204 dm²
Total screening area	467	467	467
Grain tank	52 hl	65 hl	65 hl
Unl. height	420 cm	420 cm	420 cm
Tyres front (Finland)	620/75R30	620/75R30	620/75R30
Tyres front, alternative	800/65R32	800/65R32	800/65R32
Tyres rear (Finland)	16/70-20	16/70-20	16/70-20
Tyres rear, alternative	460/70R24	460/70R24	460/70R24
Reel forward/backw. adjustment	hydr.	hydr.	hydr.
Reel speed adjustment	hydr.	hydr.	hydr.
Threshing cyl. speed adjustment	hydr.	hydr.	hydr.
Bottom sieve	adj.	adj.	adj.
Brakes	wet disc	wet disc	wet disc
Reverser	x	x	x
Air conditioning	x	x	x
Heating	x	x	x
Grain loss indicator	x	x	x
Floating cutting platform	x	x	x
Type of cutting platform floating	autom.	autom.	autom.

Konedata - Search

Laverda M180 – M200

Laverda M 60 – M 90

Laverda M180 – M200

Laverda M 300 – M 310

Laverda M 400 – M 410

Fiatagri 3850-3890

Laverda AL rev – AL quattro

Laverda 255 LCS – 296 LCS