Siirry pääsisältöönSiirry hakuun
HomeTractorsDeutz / Deutz-FahrDeutz-Fahr Agroplus 60-80

Konedata - Search

Siirry sivupalkkiinSiirry alaosaan

Deutz-Fahr Agroplus 60-80

01DFAgroplus70
01DFAgroplus70ohjaamo
01DFAgroplus70
01DFAgroplus70ohjaamo
Manufacturer
Models
Deutz-Fahr Agroplus 60, Deutz-Fahr Agroplus 70, Deutz-Fahr Agroplus 80
Years
1996-2004
Info

With the acquisition of Same, a cheaper Agroplus range was introduced alongside the Agrotron models. This range was based almost entirely on Same technology, except for the engine, and they were also manufactured in Italy.

The first Agropluses were the 60 and 70 models, introduced in autumn 1996. The main difference in these tractors compared to the Same Dorado was the traditional air-cooled Deutz engine. The Agroplus 60 had a 3-cylinder 3.1-liter engine, and the 70 had a 4-cylinder 4.1-liter engine. Later, a more powerful 4-cylinder Agroplus 80 was also introduced.

The transmission was standard 20+10 or 30+15 with crawler gears. With an optional 3-speed powershift, speeds of 45+45 were available. The direction reverser was mechanical. Same technology included oil-bath brakes, which could also be used as steering brakes on the front wheels if desired. The front axle had a engageable differential lock, but initially the tractor was also delivered without the lock. The power take-off (PTO) was three-speed.

The cab was simple, but the gear levers were located on the side. A low-roof version was available in parallel, with a minimum height of just 225 cm. The tractor could also be delivered equipped only with a rollover protection bar. Later models had the exhaust pipe mounted on the left pillar of the cab.

Partly based on the same technology were the Agrocompact models intended for viticulture and fruit growing, which, however, had Same's 3.0 and 4.0-liter engines.

This is an automated translation. Please report any issues in the translation.

Technical data
ModelDeutz-Fahr Agroplus 60Deutz-Fahr Agroplus 70Deutz-Fahr Agroplus 80
Manufacturer nameDeutz-FahrDeutz-FahrDeutz-Fahr
Imported to FinlandYesYesNo
Years1996-20041996-20042000-2004
Engine modelF3L913F4L913F4L913
Cyl/Turbo/Intercooler344
Displacement3060 cm³4085 cm³4085 cm³
Bore x stroke102×120 mm102×120 mm102×120 mm
Rated power60/2400 hp DIN/rpm70/2300 hp DIN/rpm77/2300 hp DIN/rpm
Torque---
Gears30+1530+1530+15
Synchronized gears30+1530+1530+15
Powershift gearsopt.opt.opt.
Reversermech.mech.mech.
Speeds in km/h0,25-400,25-400,25-40
Hydr. flow l/min35 l/min35 l/min35 l/min
Hydraulic pressure180 bar180 bar180 bar
Lift controlsmech.mech.mech.
Lift capacity2800/3600 kg2800/3600 kg3600 kg
PTO speeds540/750/1000540/750/1000540/750/1000
Brakeswet discwet discwet disc
Steeringhydrost.hydrost.hydrost.
Turning circle m 2WD77.4-
Turning circle m 4WD8.18.68.6
Front tyres 2WD7.50-167.50-18-
Front tyres 4WD12.4R2011.2R2411.2R24
Rear tyres 2WD14.9R3016.9R30-
Rear tyres 4WD14.9R3016.9R3016.9R30
Weight 2WD2550 kg2750 kg-
Weight 4WD2900 kg3100 kg3100 kg
Height with cab243 cm246 cm246 cm
Length (2WD/4WD)384 cm397 cm397 cm
Wheelbase (2WD/4WD)216/211 cm229/224 cm229/224 cm
Fuel tank90 l90 l90 l
Cab noise level79 dB79 dB79 dB
Solid cabxxx
Diff. lockdifferential lock with cogsdifferential lock with cogsdifferential lock with cogs
Creeper gearxxx